First, product characteristics

1. It can effectively control the ratio of the anode to the cathode.

2. Anode dissolves well and produces less anode slime.

3. Anode material is easy to be loaded or supplemented.

4. Anode materials are used completely and energy consumption is saved.

5. titanium clad copper: it can not only guarantee the original electrical conductivity of the copper material, but also protect the copper body from corrosion by using titanium cover, and greatly reduce it.

The pollution of electroplating and electroplating solution.

Second, method of use

The poor conductivity of

 1. Titanium, usually in the hook out of the water current is less than 0.26A2, or hook fever, lead plating solution temperature, cooling capacity increases, waste of energy, even because of fever burned plastic tank, found that titanium basket hook becomes hot, can increase the quantity or increase the size of titanium titanium basket the basket hook cross section to improve conductive titanium basket.

2. The titanium blue hook and the electrode generally do not contact the plane or the circular surface. This way is easy to cause bad contact and cause the spot corrosion of the electrode.

3. Titanium basket should be slightly higher than the surface to prevent the outflow of the anode slag.

4. titanium basket should be higher than the part 100-150mm to avoid the focus on the lower end parts and cause the burning.

5. The titanium basket should be closely contacted with the anode. Otherwise, the anode potential of the titanium basket will rise sharply, causing the oxygen evolution and chlorine evolution reaction on the titanium blue surface, resulting in the damage of titanium blue and the oxidation of additives.

6. in order to prevent the burr from the coating, the anode bag should be outsourced in the titanium basket because the bag is usually used for a long time instead of extirpation, so it is suggested that the "double bag" method be used.

7. Anode bag should be tightly packed with the titanium basket, and the bottom of the bag should be left out for a few centimeters to store the possible anode mud slag.